How To Replace Control Board 8186393 On Kitchenaid Range

We're sorry, but our Q&A experts are temporarily unavailable.
Please cheque back later if you still haven't found the answer yous need.

Broke the glass console within the oven door -- dropped a blistering dish on the glass!

Hands removed the door from the oven by releasing clips fastened to the door hinge -- very nicely engineered. Removed about 6 philips head screws to permit the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reattached the door to the oven. Cleaning the inside of the door took longer than the bodily repair!

Parts Used:

Full Repair Time:

xxx - 60 mins

217 of 266 people found this instruction helpful.

Was this education helpful to you?

Cheers for voting!

When using cocky cleaning, oven door wouldn't open and screen panel went blank.

I searched similar problems on the web and learned that a whole lot of people have Kitchenaid stove with the same problem. They all stated that the thermostat burns when self cleaning. Since technician wanted $190.00, I decided to change it myself. The function cost me $40.00. To instal the thermostat, I removed the console at the back of the stove and the thermostat is attached with two wires. After I replaced the thrmostat, the screen panel came on and I was able to open the door. I am posting this to tell people that anyone can do this.

Parts Used:

Abdurehman from Lawrenceville, GA
Difficulty Level:

Really Easy
Total Repair Time:

xv - 30 mins

87 of 93 people found this pedagogy helpful.

Was this instruction helpful to you?

Thank you for voting!

Cracked the inner door glass past wiping with wet rag when hot

Removed the oven door by following the straightforward instructions in the user's manual. Removed philips caput screws to take the door associates apart. Removed clips holding the ii inner door drinking glass plates, and the ii plates. Removed the clench holding the broken glass plate, and then the glass and associated glass fragments. Then cleaned and re-installed the three glass plates and their clamps in reverse order. Re-assembled the door and re-attached to the oven. Only cautionary annotation is to be careful when removing, handling and re-installing the various glass plates. Lookout out for fragments from the cleaved plate; they can cut you and/or autumn on the floor.

Parts Used: